Для мониторов

KMA220

Chief KMA220B — Dual Horizontal Monitor Accessory
 
This accessory allows you to view two flat panel screens side-by-side with a pivot or swing arm wall or desk mount.

KMA320

Chief KMA320B — Triple Horizontal Monitor Accessory
 
The accessory allows you to view three flat panel screens side-by-side with a pivot or swing arm wall or desk mount.

KRA

Chief KRA219B — Kontour™ KRA219 K1 & K2 Narrow-Gap Table Clamp Kit
 
Use the enhanced Kontour™ KRA219 K1 & K2 Table Clamp Kit for installations when the gap between edge-of-table and rear wall panel is less than 1/2" (12.5 mm).
Chief KRA219S — Kontour™ KRA219 K1 & K2 Narrow-Gap Table Clamp Kit
 
Use the enhanced Kontour™ KRA219 K1 & K2 Narrow-Gap Table Clamp Kit for installations when the gap between edge-of-table and rear wall panel is less than 1/2" (12.5 mm).
Chief KRA220B — Kontour™ KRA220 K1 & K2 Extension Arm
 
Use the enhanced Kontour™ KRA220 K1 & K2 Extension Arm to provide an additional 6.5" (165 mm) of reach for installations requiring additional range-of-motion.  Great for use on dual-arm mounts to provide improved push-back of the monitors to free additional work surface real estate while also providing additional extension for deeper work surfaces. Note: use of the KRA220 accessory reduces the total weight capacity of the mount by 15 lbs (6.8 kg)
Chief KRA220S — Kontour™ KRA220 K1 & K2 Extension Arm
 
Use the enhanced Kontour™ KRA220 K1 & K2 Extension Arm to provide an additional 6.5" (165 mm) of reach for installations requiring additional range-of-motion.  Great for use on dual-arm mounts to provide improved push-back of the monitors to free additional work surface real estate, while also providing additional extension for deeper work surfaces. Note: use of the KRA220 accessory reduces the total weight capacity of the mount by 15 lbs (6.8 kg)
Chief KRA221B — Kontour™ KRA221 K1C Expansion Arm Kit
 
Use the enhanced Kontour™ KRA221 K1C Expansion Arm Kit to add an additional K1C monitor arm to an existing K1C installation. This provides a fast and easy means of upgrading from an existing single-arm K1C120 to a dual-arm K1C220 configuration. The KRA221 can be used to add a 3rd and/or 4th arm to a center-of-table multi-workstation configuration, using the KRA226 grommet plate accessory.
Chief KRA221S — Kontour™ KRA221 K1C Expansion Arm Kit
 
Use the enhanced Kontour™ KRA221 K1C Expansion Arm Kit to add an additional K1C monitor arm to an existing K1C installation. This provides a fast and easy means up upgrading from an existing single-arm K1C120 to a dual-arm K1C220 configuration. The KRA221 can be used to add a 3rd and/or 4th arm to a center-of-table multi-workstation configuration, using the KRA226 grommet plate accessory.
Chief KRA222B — Kontour™ KRA222 K2C Expansion Arm Kit
 
Use the enhanced Kontour™ KRA222 K2C Expansion Arm Kit to add an additional K2C monitor arm to an existing K2C installation. This provides a fast and easy means up upgrading from an existing single-arm K2C120 to a dual-arm K2C220 configuration. The KRA222 can also be used to add a 3rd and/or 4th arm to a center-of-table multi-workstation configuration, using the KRA226 grommet plate accessory.
Chief KRA222S — Kontour™ KRA222 K2C Expansion Arm Kit
 
Use the enhanced Kontour™ KRA222 K2C Expansion Arm Kit to add an additional K2C monitor arm to an existing K2C installation. This provides a fast & easy means up upgrading from an existing single-arm K2C120 to a dual-arm K2C220 configuration. The KRA222 can also be used to add 3rd or 4th arms to a center-of-table multi-workstation configuration, using the KRA226 grommet plate accessory.
Chief KRA223B — Kontour™ KRA223 Dual Monitor Array Accessory
 
Use the new Kontour™ KRA223 Dual Monitor Array accessory to upgrade an existing K1 or K2 single-arm monitor mount product to a dual monitor array. Note: only to be used with K1C120, K1D120, K1P120, K1S120, K1W120, K2C120, K2P120, and K2W120 products
Chief KRA223S — Kontour™ KRA223 Dual Monitor Array Accessory
 
Use the new Kontour™ KRA223 Dual Monitor Array accessory to upgrade an existing K1 or K2 single-arm monitor mount product to a dual monitor array. Note: only to be used with K1C120, K1D120, K1P120, K1S120, K1W120, K2C120, K2P120, and K2W120 products
Chief KRA224B — Kontour™ KRA224 Dual Monitor Array Handle Accessory
 
Pair the new Kontour™ KRA224 Array Handle accessory with the KRA223 Dual Monitor Array accessory to fully upgrade an existing K1 or K2 single-arm monitor mount product to a dual monitor array with handle. Note: only to be used with K1C120, K1D120, K1P120, K1S120, K1W120, K2C120, K2P120 and K2W120 products
Chief KRA225B — Kontour™ KRA225 Centris™ Extreme Tilt Monitor Head Accessory
 
Use the Kontour™ KRA225 Centris™ Extreme Tilt Monitor Head accessory to easily upgrade any enhanced K2 series articulating arm mount with the benefits of the enhanced Centris Extreme Tilt head, which includes a full 75-degrees of tilt up of the monitor and quick-release interface for easy monitor servicing.
Chief KRA225S — Kontour™ KRA225 Centris™ Extreme Tilt Monitor Head Accessory
 
Use the Kontour™ KRA225 Centris™ Extreme Tilt Monitor Head accessory to easily upgrade any enhanced K2 series articulating arm mount with the benefits of the enhanced Centris Extreme Tilt head, which includes a full 75-degrees of tilt up of the monitor and quick-release interface for easy monitor servicing.
Chief KRA226B — Kontour™ KRA226 Center-of-Table Grommet Plate
 
Use the Kontour™ KRA226 Center-of-Table Grommet Plate accessory for installing a K1C or K2C monitor mount in the center of a table for a great multi-workstation solution. Use up to 4 monitor arms on the column by pairing with a standard K1 or K2 mount and additional KRA221 or KRA222 Expansion Arm kits.
Chief KRA226S — Kontour™ KRA226 Center-of-Table Grommet Plate
 
Use the Kontour™ KRA226 Center-of-Table Grommet Plate accessory for installing a K1C or K2C monitor mount in the center of a table for a great multi-workstation solution. Use up to 4 monitor arms on the column by pairing with a standard K1 or K2 mount and additional KRA221 or KRA222 Expansion Arm kits.
Chief KRA227B — K1D, K1P, K1S, & K1W Dual Monitor Upgrade Kit, Black
 
The KRA227 Dual Monitor Upgrade Kit provides a fast & easy means of adding a second arm to any single-arm K1D120, K1P120, K1S120, or K1W120 mount; converting them into a dual-arm K1D220, K1P220, K1S220, or K1W220.
Chief KRA227S — K1D, K1P, K1S, & K1W Dual Monitor Expansion Arm Kit
 
The KRA227 Dual Monitor Upgrade Kit provides a fast & easy means of adding a second arm to any single-arm K1D120, K1P120, K1S120, or K1W120 mount; converting them into a dual-arm K1D220, K1P220, K1S220, or K1W220.
Chief KRA228B — K2P, K2W Dual Monitor Upgrade Kit, Black
 
The KRA228 K2 Dual Monitor Upgrade Kit provides a fast & easy means of adding a second arm to any single-arm K2P120 or K2W120 mount; converting them to the dual-arm K2P220 or K2W220.
Chief KRA228S — K2P, K2W Dual Monitor Upgrade Kit, Silver
 
The KRA228 K2 Dual Monitor Upgrade Kit provides a fast & easy means of adding a second arm to any single-arm K2P120 or K2W120 mount; converting them to the dual-arm K2P220 or K2W220.
Chief KRA231B — K1C and K2C Column Mounted Extreme Tilt Head Accessory, Black
 
The KRA231 provides a 3rd Extreme Tilt Head for use on any Kontour K1C or K2C mount, for easy upgrade from Dual to Triple Monitor configuration. Easily mounts to the column without impacting the existing installation in any way.
Chief KRA231S — K1C and K2C Column Mounted Extreme Tilt Head Accessory, Silver
 
The KRA231 provides a 3rd Extreme Tilt Head for use on any Kontour K1C or K2C mount, for easy upgrade from Dual to Triple Monitor configuration. Easily mounts to the column without impacting the existing installation in any way.

KRA202

Chief KRA202 — KONTOUR™ Grommet Accessory - K1D Products
 
Provides a rock-solid bolt down option for any Kontour™ K1D series product. Note: KRA202 is not for use with new enhanced Kontour products! Discontinued April 1, 2015. Is now included in the new K1D Kontour monitor product.

KRA300

Chief KRA300B — KONTOUR™ Laptop Tray Accessory
 
The KRA300 Laptop Tray accessory provides an elegant & ergonomic solution for everyday laptop use when paired with any of Chief's Kontour™ monitor mounts.  See the Accessories tab below for details on compatible products. Arm not included. Tray accessory only.
Chief KRA300S — KONTOUR™ Laptop Tray Accessory
 
The KRA300 Laptop Tray accessory provides an elegant & ergonomic solution for everyday laptop use when paired with any of Chief's Kontour™ monitor mounts.  See the Accessories tab below for details on compatible products.

KSA1001

Chief KSA1001B — Wall Plate Accessory
 
Can be used to quickly change a desk mount into a wall mount.

KSA1002

Chief KSA1002B — Desk Clamp Accessory
 
Can be used to quickly change a wall mount into a desk mount.

KSA1003

Chief KSA1003B — KSA1003 Extension Arm Accessory
 
The KSA1003 Extension Arm Accessory provides 6.5" of additional extension for F- and K-series monitor arm mounts and pivot/tilt wall mounts.
Chief KSA1003S — KSA1003 Extension Arm Accessory
 
The KSA1003 Extension Arm Accessory provides 6.5" of additional extension for F- and K-series monitor arm mounts and pivot/tilt wall mounts.

KSA1004

Chief KSA1004B — Height-Adjustable Extension Arm Accessory
 
The KSA1004 attaches to any single or dual arm mount to add arm extension and height adjustment capability.

KSA1005

Chief KSA1005B — Security Hardware Kit
 
The KSA1005 replaces exposed hardware on most small flat panel arm mount configurations with security hardware.
Chief KSA1005S — Security Hardware Kit
 
The KSA1005 replaces exposed hardware on most small flat panel arm mount configurations with security hardware.

KSA1017

Chief KSA1017B — Pole Clamp Accessory
 
Quickly changes a wall mount or desk mount for a small flat panel display into a pole mount.

KSA1019

Chief KSA1019B — Centris Turntite Head Accessory
 
The KSA1019 accessory provides external tilt and roll friction adjustment.

KSA1021

Chief KSA1021B — Keyboard Tray Accessory
 
The perfect accessory for mounting a keyboard to save valuable desk space at the home or office.
Chief KSA1021S — Keyboard Tray Accessory
 
The perfect accessory for mounting a keyboard to save valuable desk space at the home or office.

KSA1022

Chief KSA1022B — Wall Track Accessory
 
The KSA1022 Wall Track Accessory is compatible with Chief's monitor mounts and accessories, and is a great slat wall solution for easy monitor adjustment.

KSA1024

Chief KSA1024B — Centris Quick Connect Bracket
 
A quick release bracket for small flat panel display mounts. Note: not compatible with Kontour K1 or K2-series mounts.

KSA1250

Chief KSA1250B — Quick-Connect Interface for Dell® Monitors
 
Use the Chief KSA1250 Quick-Connect Interface for fast & easy tool-free installation of any Dell® monitor to any Chief monitor mount product. Simply click the monitor into place via the Dell® Quick Release slots, and away you go! See the following enhanced Kontour™ products that include the KSA1250 pre-installed for the fastest possible tool-less installation out-of-the-box:

KTA1000

 
Аксессуар KTA1000 Black
Chief KTA1000S — Pole-Mount Grommet Accessory
 
Provides a rock-solid bolt down option for the Chief KTA pole accessories, for pole mounted monitor arms and multi-monitor arrays.

KTA1001

Chief KTA1001B — Array Connector
 
Provides a connection between two array components, for creating extended lengths for larger multiple monitor installations.
Chief KTA1001S — Array Connector
 
Provides a connection between two array components, for creating extended lengths for larger multiple monitor installations.

KTA1002

Chief KTA1002B — Array Free Standing Base
 
Free-standing base for multi-monitor applications, when paired with other KTA accessories.
Chief KTA1002S — Array Free Standing Base
 
Free-standing base for multi-monitor applications, when paired with other KTA accessories.

KTA1003

Chief KTA1003B — Array Dual Pole Clamp
 
The KTA1003 allows you to attach an additional pole and base to an existing array, or connect two arrays together.
Chief KTA1003S — Array Dual Pole Clamp
 
The KTA1003 allows you to attach an additional pole and base to an existing array, or connect two arrays together.

KTA1004

Chief KTA1004B — Array Desk Clamp
 
A desk clamp for installing multi-monitor systems or pole mount swing arms.
Chief KTA1004S — Array Desk Clamp
 
A desk clamp for installing multi-monitor systems or pole mount swing arms.

KTA1005

Chief KTA1005B — Array Turn-Tite Centris Head
 
The KTA1005 allows you to add an additional monitor to an existing multi-monitor array installation.
Chief KTA1005S — Array Turn-Tite Centris Head
 
The KTA1005 allows you to add an additional monitor to an existing multi-monitor array installation.

KTA1007

Chief KTA1007B — Array Large Grommet Accessory
 
Large Grommet Accessory for mounting pole-mounted multi-monitor arrays to a work surface.
Chief KTA1007S — Array Large Grommet Accessory
 
Large Grommet Accessory for mounting pole-mounted multi-monitor arrays to a work surface.

KTA1014

Chief KTA1014B — Array 14" Pole
 
KTA1014 is a 14" Pole for use in creating custom Multi-Monitor Array configurations, or can be paired with any Kontour K1P or K2P-series monitor arm solution.
Chief KTA1014S — Array 14" Pole
 
KTA1014 is a 14" Pole for use in creating custom Multi-Monitor Array configurations, or can be paired with any Kontour K1P or K2P-series monitor arm solution.

KTA1028

Chief KTA1028B — Array 28" Pole
 
KTA1028 is a 28" Pole for use in creating custom Multi-Monitor Array configurations, or can be paired with any Kontour K1P or K2P-series monitor arm solution.
Chief KTA1028S — Array 28" Pole
 
KTA1028 is a 28" Pole for use in creating custom Multi-Monitor Array configurations, or can be paired with any Kontour K1P or K2P-series monitor arm solution.

KTA1036

Chief KTA1036B — Array 36" Pole
 
KTA1036 is a 36" Pole for use in creating custom Multi-Monitor Array configurations, or can be paired with any Kontour K1P or K2P-series monitor arm solution.
Chief KTA1036S — Array 36" Pole
 
KTA1036 is a 36" Pole for use in creating custom Multi-Monitor Array configurations, or can be paired with any Kontour K1P or K2P-series monitor arm solution.

KTA1042

Chief KTA1042B — стойка 106,6 см (без основания, для модернизации мультимониторных креплений)
 
CHIEF KTA1042B Стойка длиной 106,6 см (41'') черная, предназначена для сборки мультимониторных креплений из раздельных элементов
Chief KTA1042S — Array 42" Pole
 
KTA1042 is a 42" Pole for use in creating custom Multi-Monitor Array configurations, or can be paired with any Kontour K1P or K2P-series monitor arm solution.

KTA220

Chief KTA220B — Dual Monitor Pole Clamp
 
View two screens side-by-side on a pole or other Chief KTA product.
Chief KTA220S — Dual Monitor Pole Clamp
 
View two screens side-by-side on a pole or other Chief KTA product.

KTA225

Chief KTA225B — Планка поперечная для 2х широкоформатных ЖК-мониторовРаспродажа
 
CHIEF KTA225B Планка поперечная с тремя 2D-головками для широкоформатных ЖК-мониторов, ширина корпуса 254 - 762мм, цвет черный - предназначена для сборки мультимониторных креплений
Chief KTA225S — Widescreen Dual Monitor Pole Clamp
 
View two widescreen monitors side-by-side on a pole.

KTA320

Chief KTA320B — Triple Monitor Pole Clamp
 
View three screens side-by-side on a pole or other Chief KTA product.
Chief KTA320S — Triple Monitor Pole Clamp
 
View three screens side-by-side on a pole or other Chief KTA product.

KTA325

Chief KTA325b — black Планка поперечная с тремя 3D-головками для широкоформатных ЖК-мониторов, ширина корпуса 254 - 635мм - предназначена для сборки мультимониторных крепленийРаспродажа
 
CHIEF KTA325b black Планка поперечная с тремя 3D-головками для широкоформатных ЖК-мониторов, ширина корпуса 254 - 635мм - предназначена для сборки мультимониторных креплений
Chief KTA325S — Widescreen Triple Monitor Pole Clamp
 
View three widescreen monitors side-by-side on a pole or other Chief KTA product.

OFB

Chief OFBLUB — Lightweight Universal Office Furniture Slatwall Interface
 
The OFBLU is a universal interface bracket that provides easy installation of any KONTOUR™ or K-series monitor arm wall mount on most major brands of office furniture slatwall.  The OFBLU is Chief's light-weight universal interface and is rated to support monitors up to 25 lbs. total weight. For applications with monitors weighing greater than 25 lbs., use the more heavy-duty OFBU that is rated to support up to 40 lbs. total monitor weight.
Chief OFBLUS — Lightweight Universal Office Furniture Slatwall Interface
 
The OFBLU is a universal interface bracket that provides easy installation of any KONTOUR™ or K-series monitor arm wall mount on most major brands of office furniture slatwall.  The OFBLU is Chief's light-weight universal interface and is rated to support monitors up to 25 lbs. total weight. For applications with monitors weighing greater than 25 lbs., use the more heavy-duty OFBU that is rated to support up to 40 lbs. total monitor weight.
Chief OFBUB — Universal Office Furniture Slatwall Interface - Single and Multi-Monitor Mounts
 
The OFBU is a universal interface bracket that provides easy installation of any KONTOUR™ or K-series monitor arm wall mount on most major brands of office furniture slatwall.  The OFBU is Chief's heavy-duty universal interface and is rated to support single or multiple monitors up to 40 lbs. total weight.
Chief OFBUS — Universal Office Furniture Slatwall Interface - Single and Multi-Monitor Mounts
 
The OFBU is a universal interface bracket that provides easy installation of any KONTOUR™ or K-series monitor arm wall mount on most major brands of office furniture slatwall.  The OFBU is Chief's heavy-duty universal interface and is rated to support single or multiple monitors up to 40 lbs. total weight.