Christie Mirage WU7K-MThe most compact 3D digital projector in its class

Артикул: 
118-056102-XX

The most compact in its class, the Christie Mirage WU7K–M DLP projector provides the high-performance and feature-rich standards you expect – Up to 6,300 ANSI lumens and up to 10,000:1 contrast for crisp, detailed images, excellent color, brightness uniformity control combined with low maintenance.  
Utilizing unique electronics and ultra-high bandwidth processing power, Christie’s technology advancements include Dual Input 3D enabling the display of two discrete 60Hz video channel inputs for high performance 120Hz output. 

       
 
Technology 3DLP®
Resolution 1920 x 1200 WUXGA
Brightness 6,300 lumens
Contrast 650:1 ANSI / 10,000:1 FOFO
Illumination Dual Osram® PvIP® 200W lamps
Lamp life 2000 hours @ 200W , 3000 hours @ 150W
Height 10.2" (259mm)
Width 19.7" (500mm)
Depth 22.1" (561mm)
Weight 55 lb (25kg)
 
       

 
The Christie Mirage WU7K-M features three modes of 3D input.  It supports native frame rate up to 120Hz at WUXGA resolution over Dual Link DVI-D as well as frame doubled content for maximum source compatibility and high-performance, flicker-free operation.  With the addition of a second input module, the Dual Input 3D mode enables the display of a frame locked passive stereo source for high-performance active stereo at 120Hz without the need of a passive to active converter.
The Mirage WU7K-M offers high efficiency and low cost of ownership featuring long life dual lamps, automatic projector shut-down without a signal and adjustable power for cooling fans.
Features

  • WUXGA resolution (1920 x 1200)
  • Up to 6300 ANSI lumens
  • Up to a full 120Hz native frame rate
  • Standard full 330MHz dual-link DVI-D
  • Variable contrast ratio using electronically adjustable iris for crisp, detailed images - 2500-10,000:1 (full on, full off) / 650:1 ANSI 
  • At maximum brightness the projector draws a maximum power of 870W 
  • Smallest chassis in its class
  • Motorised yellow notch filter 
  • Dual PviP lamps (200W) 
  • Embedded Christie Twist™ image warping and edge-blending 
  • Dust-sealed engine, filter-free design 
  • Intelligent Lens System (ILS™) for zoom, focus, horizontal and vertical offset
  • AutoDesk® Revit® model
  • Built-in portrait display capabilities*

*Christie M Series stacking frame is required in portrait orientation.
A full suite of specifically-designed lenses offers flexibility and an embedded Christie Twist™ module enables advanced internal image warping and edge-blending.  Easy to set-up and easy to use, the dual-lamp platform offers greater choice and installation flexibility with a more optimal aspect ratio. 
With the consistency of DLP technology, the Christie Mirage WU7K-M offers reliable, affordable, dual- lamp brightness, in the smallest chassis in its class. Combining additional standard features, an expanded lens suite and industry-leading Christie service, the Christie Mirage WU7K-M provides high performance and ease of use for all 3D/Advanced Visualisation users.
More pixels, more performance, more reality.

Specifications

       
 

Image
  • Up to 6,300 ANSI lumens
  • 2,500-10,000:1 FOFO
  • 650:1 ANSI
  • Electronically adjustable iris (manual or dynamic)
Display technology and resolution
  • 3-chip 0.96" DMD
  • Native WUXGA 1920 x 1200
  • Frame delay: as little as one frame
Input signal compatibility
  • Native dual-link DVI-D
  • Analog BNC (optional)
  • Frame-doubled 3D - dual-link DVI, VGA (HDMI, analogue BNC & SDI optional)
Inputs, control & networking
  • RS232 in/out
  • RS422 in
  • Ethernet (10/100)
  • USB device
  • GPIO (RS232 9-pin male connector)
  • Built-in backlit LCD keypad
  • Remote control (with optional wired XLR connection)
  • Slot 1-2 standard (populated):  dual-link DVI-D (330MHz) and VGA (165MHz)
  • Slots 3-4 are available for option cards

Optional input modules

  • Full bandwidth analogue BNC
  • Dual-link DVI input card (330MHz), \- VGA (165MHz)
  • Dual SD/HD-SDI
  • Video decoder
  • Twin HDMI
Advanced feature set
  • Embedded Christie Twist™ - internal advanced warping and edge-blending
  • LiteLOC™
  • Electronically adjusted iris (manual or dynamic)
  • Dust-sealed, filter-free design
  • Reduced power requirements (as compared to competitive products on the market today) – at maximum brightness the unit only draws 870W; standby power consumption (phantom power draw) is less than 20W
  • Reduced noise levels
  • LCD keypad – active keys are amber to indicate whether function selected will be seen by the audience
  • Motorised yellow notch filter
  • Built-in portrait display capabilities*

*Christie M Series stacking frame is required in portrait orientation.

Lens mount
  • Motorised horizontal and vertical lens offset
  • Scheimpflug (tilt) adjustment
  • Built-in light shutter
  • Tool-free lens insertion system
  • All lenses are optional
Lamp
  • Dual Osram PvIP 200W lamps
  • Lamp life: 2000 hours @ 200W , 3000 hours @ 150W
Light output control (LITELOC™)
  • Provides constant brightness tracking and monitors lamp output. It also automatically adjusts the power to ensure constant, uniform brightness across the image – on a multiple-projector screen or multiple-screen display.
Power requirements
  • 100V AC to 240V AC @ 50/60 Hz
  • Power consumption: 870W maximum
  • Thermal dissipation: 2971BTU/hr
  • Operating current: 9A @ 100V
Dimensions (excluding lens)
  • Weight: 55lb (25kg) without lens
  • Shipping weight: 87 lb (38 kg)
  • Size: 19.7" W x 22.1" L x 10.2" H (500mm W x 561mm L x 259mm H)
Standard accessories
  • User manual
  • IR remote
  • Line cord
  • Two dual-link DVI-D cards
  • 3D sync cable
Optional accessories
  • Coarse dust filter
  • ILS lens adapter kit
  • Stacking frame
  • Dual HD/SDI input card 
  • Twin HDMI input card
  • Dual-link DVI input card
  • Video decoder input card*

*may not include 3D support

Operating environment
  • Operating temperature: 40-104°F (5-40°C)
  • Humidity (non-condensing): 20-80% non-condensing
Regulatory approvals
  • UL/CSA/IEC 60950 (3rd edition)
  • FCC Class A, CE, CCC
  • This product conforms to all relevant European directives, standards, safety, health and environmental concerns
  • RoHS, WEEE
Warranty
  • 3 years parts and labour (including light engine)
 
       

Due to constant research, specifications and features are subject to change without notice.

Отправить запрос

Защита от спама